Aprašymas
Digital ECU Tuner 3 is the successor of the popular digital pigtop ECU Tuner 2.
Thanks to the use of a more powerful processor and 8Mb DataFlash, it was possible to significantly extend the capabilities of the device.
The main changes include USB port support, two switchable sets of 4 maps with dimensions 16×16, advanced adaptive ignition input, 4 times more accurate DAC converter, off-line logging to DataFlash memory and many, many more.
Features of the device:
- 4 independent 16×16 maps (fuel map, two PWM maps, ignition map),
- 8 correction maps 16×1,
- 2 independent, switchable sets of maps,
- possibility of modifying a single analog signal,
- 4 analog inputs,
- built-in DataFlash enabling logging in without a connected laptop,
- power supply measurement,
- the ability to modify the signal of the frequency flow meter (17Hz-4kHz),
- ignition signal service using inductive, Hall and optical sensors as well as signals controlling the ignition module. The device supports both single ended and balanced signals (differential),
- support for many types of ignition: 60-2, 36-2, 36-1, Multitooth, Ignition Modules,
- operation of turbocharger supercharger control valve,
- support for 4 high-resistance injectors (work in the “full group” system),
- parametric ON / OFF output,
- automatic conversion from MAP to MAF with the use of a learning algorithm,
- starting procedure,
- road dyno,
- calibration capability of any analog sensor, so that analog values can be displayed in their real values (eg signal from the MAP of the sensor in bars, signal from the broadband probe as AFR, etc.),
- the possibility of free firmware upgrade as the device develops (eg new modes of ignition, additional functions),
- communication with the device is carried out using the USB connector
- 24 months warranty for the device
Hardware requirements:
The following minimum configuration is required for correct cooperation with the device.
- Windows 2000, XP, Vista, Windows 7
- Screen resolution of at least 1024×768 16bit,
- A processor with a clock of at least 600MHz,
- USB port
The composition of the set:
- Digital Ecu Tuner 3 device,
- AA USB cable,
- Plug,
- A set of pins for the plug,
- CD with software, drivers and user’s instructions in Polish,
- An additional set of resistors and a rectifying diode useful when installing the device.
